Ferry Pass Water Hardness & Quality Report (2026)
Water Hardness
~0–59 mg/L
Softestimated · not lab-verified
Source
groundwater
pH Level
8.3
neutral = 7.0
Lead
0.005 mg/L
✓ Below action level
TDS
582.9 mg/L
Est. Daily Cost
$0.08
energy & soap waste
Source: See methodology section below · Updated 2026
0–60
mg/L
Soft
61–120
mg/L
Moderately Hard
121–180
mg/L
Hard
180+
mg/L
Very Hard
Appliance Damage Report
In Ferry Pass, your appliances are currently losing 4% efficiency due to mineral buildup.
| Appliance | In Ferry Pass | Soft Water City | Efficiency Loss |
|---|---|---|---|
| Kettle | 8.2 yrs | 8.5 yrs | -4% |
| Washing Machine | 11.5 yrs | 12 yrs | -4% |
| Water Heater | 14.4 yrs | 15 yrs | -4% |
Regional Water Comparison
How Ferry Pass compares to its nearest neighbours
| City | Hardness | PFAS (ppt) | Risk | Source |
|---|---|---|---|---|
| ▶ Ferry Pass, Florida | ≈ 0–59 mg/L | 9 ppt | 🟢 Soft | groundwater |
| Brent, Florida | ≈ 120–179 mg/L | 5.7 ppt | 🟠 Hard | groundwater |
| Ensley, Florida | ≈ 0–60 mg/L | 7.4 ppt | 🟢 Soft | groundwater |
| East Pensacola Heights, Florida | ≈ 0–60 mg/L | 6 ppt | 🟢 Soft | groundwater |
| Pensacola, Florida | ≈ 0–60 mg/L | 1593.5 ppt | 🟢 Soft | groundwater |
National Benchmark
How Ferry Pass compares to the USA average
| Benchmark | Hardness | Appliance Risk |
|---|---|---|
| ▶ Ferry Pass | ≈ 0–59 mg/L | 🟢 None |
| USA National Avg | 151 mg/L | 🟠 Moderate |
| Scarsdale Top Rated | 0.02 mg/L | 🟢 None |
Bring Scarsdale-quality water to your Ferry Pass home
Shop water softeners on Amazon.com →
What Makes Ferry Pass's Water Unique?
Local geology and source profile
Ferry Pass is a community in Escambia County, Florida, served by the City of Pensacola water utility or regional water providers. The primary water source is the Floridan aquifer, which supplies groundwater to the Pensacola area. Water is treated at local treatment facilities before distribution to residential and commercial customers in the Ferry Pass service area.
The Pensacola region sits atop the Floridan aquifer, a major groundwater system composed of Paleocene to Eocene limestone and dolomite formations. Although Florida's limestone geology typically produces hard water due to high calcium and magnesium content, the Pensacola area benefits from water treatment practices that maintain relatively soft water quality, resulting in low concentrations of dissolved minerals.
Ferry Pass residents receive soft water, which reduces mineral scale buildup on fixtures, coffee makers, and dishwashers and improves the effectiveness of soaps and detergents. Water softeners are not typically necessary for this supply, though some residents may install one for personal preference. The Pensacola water system maintains compliance with federal and state drinking water standards through regular monitoring by the Florida Department of Health; treatment processes include filtration and disinfection to maintain water quality throughout the distribution system.
Geology & Source: Floridan aquifer — Paleocene to Eocene limestone and dolomite formations beneath Escambia County; treatment practices in Pensacola maintain soft water despite limestone geology
Other Florida Water Reports
Report an Issue
Notice an error or missing data? Help us keep this page accurate. If you spot incorrect water hardness, outdated utility info, or missing details, please let us know.
All reports are reviewed by our team. Thank you for supporting data quality!
Frequently Asked Questions
Is Ferry Pass's water safe to drink?
Do I need a water softener in Ferry Pass?
How does Ferry Pass compare to the USA average?
Data Sources & Methodology
Water quality data for Ferry Pass is derived from geographic and geological modelling of the surrounding region. No federal monitoring station data was available for this location.
Water Hardness
Modelled estimate based on state-level USGS geological survey data for this region. No direct USGS Water Quality Portal measurement was matched to this city — the value reflects a statistical range calibrated to the state's dominant rock types and typical source water characteristics.
pH
Estimated from regional geology and source water characteristics. pH is correlated with water hardness and local bedrock — values may differ from utility-reported figures.
TDS — Total Dissolved Solids
Estimated using a derived ratio from water hardness and regional conductance profiles. TDS in natural water correlates strongly with total mineral content including hardness ions.
PFAS — Perfluoroalkyl and Polyfluoroalkyl Substances
EPA UCMR5 (5th Unregulated Contaminant Monitoring Rule, 2023–2025) — sum of PFAS compounds detected at the public water system serving this city. A value of 0 indicates the system was sampled with no detection above reporting limits.
Lead
Modelled estimate based on the EPA Lead and Copper Rule 90th-percentile tap-sample methodology. No publicly available per-city lead dataset with sufficient national coverage exists. Values are a conservative baseline derived from city population tier and infrastructure age — all estimates are maintained below the EPA action level of 0.015 mg/L.
Appliance Lifespan
Calculated from water hardness using a linear degradation model. Baseline lifespans represent soft-water performance (kettle: 8.5 yrs, washing machine: 12.0 yrs, water heater: 15.0 yrs). Hard water mineral scale progressively reduces operational life in direct proportion to hardness concentration.