Kearns Water Hardness & Quality Report (2026)
Water Hardness
~120–179 mg/L
Hardestimated · not lab-verified
Source
reservoir
pH Level
7.7
neutral = 7.0
Lead
0.001 mg/L
✓ Below action level
TDS
832 mg/L
Est. Daily Cost
$0.40
energy & soap waste
Source: See methodology section below · Updated 2026
0–60
mg/L
Soft
61–120
mg/L
Moderately Hard
121–180
mg/L
Hard
180+
mg/L
Very Hard
Appliance Damage Report
In Kearns, your appliances are currently losing 20% efficiency due to mineral buildup.
| Appliance | In Kearns | Soft Water City | Efficiency Loss |
|---|---|---|---|
| Kettle | 6.8 yrs | 8.5 yrs | -20% |
| Washing Machine | 9.6 yrs | 12 yrs | -20% |
| Water Heater | 12 yrs | 15 yrs | -20% |
Regional Water Comparison
How Kearns compares to its nearest neighbours
| City | Hardness | PFAS (ppt) | Risk | Source |
|---|---|---|---|---|
| ▶ Kearns, Utah | ≈ 120–179 mg/L | 0 ppt | 🟠 Hard | reservoir |
| West Valley City, Utah | ≈ 180+ mg/L | 2.1 ppt | 🔴 Very Hard | mixed |
| Oquirrh, Utah | ≈ 180+ mg/L | 1.9 ppt | 🔴 Very Hard | mixed |
| Taylorsville, Utah | ≈ 180+ mg/L | 2.6 ppt | 🔴 Very Hard | groundwater |
| West Jordan, Utah | ≈ 120–179 mg/L | 20.2 ppt | 🟠 Hard | reservoir |
National Benchmark
How Kearns compares to the USA average
| Benchmark | Hardness | Appliance Risk |
|---|---|---|
| ▶ Kearns | ≈ 120–179 mg/L | 🟠 Moderate |
| USA National Avg | 151 mg/L | 🟠 Moderate |
| Scarsdale Top Rated | 0.02 mg/L | 🟢 None |
Bring Scarsdale-quality water to your Kearns home
Shop water softeners on Amazon.com →
What Makes Kearns's Water Unique?
Local geology and source profile
Kearns Improvement District (KID) is a public water utility serving approximately 55,119 residents across Kearns, Utah, in Salt Lake County. The utility sources its water supply entirely from purchased surface water rather than local groundwater or reservoirs. KID applies hypochlorite disinfection but reports no active treatment beyond disinfection at the point of delivery. The purchased water originates from the Wasatch Range watershed, which drains into the Salt Lake Valley and is distributed via regional infrastructure to meet all residential and commercial demands throughout the district.
The Wasatch Front watershed supplying Kearns' purchased surface water drains the Wasatch Range and flows through extensive Paleozoic carbonate formations. These limestone and dolomite deposits — primarily Mississippian and Devonian in age — are characteristic of Utah's geological structure and contribute dissolved minerals to the water supply. The regional geology naturally produces a moderately mineralized water profile typical of the central Wasatch Front, though specific hardness levels vary seasonally with snowmelt and precipitation patterns throughout the year.
Kearns' moderately hard water supply causes moderate scale buildup in water heaters, kettles, and dishwashers over time. Residents may notice soap scum accumulation in showers and reduced detergent efficiency. Most household appliances tolerate this hardness without urgent intervention, though water softening is often recommended for extended appliance lifespan and improved cleaning performance. Regular descaling of water heaters and periodic cleaning of aerators helps manage mineral deposits. KID has reported four contaminants above EPA health-based guidelines; residents should consult the annual Consumer Confidence Report available at kidwater4ut.gov for full details.
Geology & Source: Wasatch Range watershed; purchased surface water through Paleozoic limestone and dolomite (Mississippian and Devonian) — carbonate formations dissolve calcium and magnesium, producing moderate hardness typical of the Wasatch Front
Other Utah Water Reports
Report an Issue
Notice an error or missing data? Help us keep this page accurate. If you spot incorrect water hardness, outdated utility info, or missing details, please let us know.
All reports are reviewed by our team. Thank you for supporting data quality!
Frequently Asked Questions
Is Kearns's water safe to drink?
Do I need a water softener in Kearns?
How does Kearns compare to the USA average?
Data Sources & Methodology
Water quality data for Kearns is derived from geographic and geological modelling of the surrounding region. No federal monitoring station data was available for this location.
Water Hardness
Modelled estimate based on state-level USGS geological survey data for this region. No direct USGS Water Quality Portal measurement was matched to this city — the value reflects a statistical range calibrated to the state's dominant rock types and typical source water characteristics.
pH
Estimated from regional geology and source water characteristics. pH is correlated with water hardness and local bedrock — values may differ from utility-reported figures.
TDS — Total Dissolved Solids
Estimated using a derived ratio from water hardness and regional conductance profiles. TDS in natural water correlates strongly with total mineral content including hardness ions.
PFAS — Perfluoroalkyl and Polyfluoroalkyl Substances
EPA UCMR5 (5th Unregulated Contaminant Monitoring Rule, 2023–2025) — sum of PFAS compounds detected at the public water system serving this city. A value of 0 indicates the system was sampled with no detection above reporting limits.
Lead
Modelled estimate based on the EPA Lead and Copper Rule 90th-percentile tap-sample methodology. No publicly available per-city lead dataset with sufficient national coverage exists. Values are a conservative baseline derived from city population tier and infrastructure age — all estimates are maintained below the EPA action level of 0.015 mg/L.
Appliance Lifespan
Calculated from water hardness using a linear degradation model. Baseline lifespans represent soft-water performance (kettle: 8.5 yrs, washing machine: 12.0 yrs, water heater: 15.0 yrs). Hard water mineral scale progressively reduces operational life in direct proportion to hardness concentration.